Dark Light
-10%
, ,

4 Channel 16 Bit I2C ADC with Programmable Gain Amplifier Module

Availability:

In stock


بورد يحوي على 4 منافذ لتحوي اشارة تماثلية Analog الى اشارة رقمية Digital والمعرف بأسم ADC بدقة 16Bit والتي تعتبر دقة عالية جدا مع امبليفاير قابل للبرمجة والتغيير لتغيير نسبة التحويل الاساسية للأشارة التماثلية. يمكن التحكم وقراءة الاشارة الرقمية الناتجة عن طريق تقنية الـ i2c المتوفرة في الاردوينو وكل المتحكات الاخرى.

6,750 د.ع 7,500 د.ع

In stock

Compare

4 Channel 16 Bit I2C ADC with Programmable Gain Amplifier Module ADS1115

For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 860 samples second over I2C. The chip can be configured as 4 single-ended input channels, or two differential channels. As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range. It can run from 2V to 5V power/logic, can measure a large range of signals and its super easy to use.
It is a great general purpose 16 bit converter. The chip’s fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. The address can be changed to one of four options Four ADCs connected on a single 2-wire I2C bus for 16 single ended inputs.

Specification:
– Wide supply range: 2.0V to 5.5V
– Continuous Mode: Only 150μA
– Single-Shot Mode: Auto Shut-Down
– Programmable data rate: 8SPS to 860SPS
– Internal low-drift voltage reference
– Internal oscillator
– Internal PGA
– I2C interface: Pin-Selectable Addresses
– Four single-ended or two differential inputs
– Programmable comparator
– This board chip uses I2C 7-bit addresses between 0x48-0x4B
– PCB size: 2.55×0.90cm/ 1.00″x0.35″ (LxW)

Package Includes:
1 x ADS1115 Module

  • Wide supply range: 2.0V to 5.5V
  • Continuous Mode: Only 150μA
  • Single-Shot Mode: Auto Shut-Down
  • Programmable data rate: 8SPS to 860SPS
  • Internal low-drift voltage reference
  • Internal oscillator
  • Internal PGA
  • I2C interface: Pin-Selectable Addresses
  • Four single-ended or two differential inputs
  • Programmable comparator
  • This board chip uses I2C 7-bit addresses between 0x48-0x4B
  • PCB size: 2.55×0.90cm/ 1.00″x0.35″ (LxW)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.