, , , ,

Arduino Research Kit

Availablity:

Out of stock


Compare

Arduino Research Kit
This is a Research Kit for Arduino Uno contains 52 kinds of different electronic components, and more than 180 components are included.

157,000 IQD

Out of stock

Arduino Research Kit

This is a Research Kit for Arduino Uno contains 52 kinds of different electronic components, and more than 180 components are included.
With this kit, we will take you from knowing to utilizing, you are able to do more experiment, get your more idea into real action without the restriction of hardware and software. We believe with this hardware + software support, you are able to become expert programmer (developer) very soon. So don’t waste time, just get this kit, and start your project right away!

This Kit includes the following items:
1 × Arduino UNO SMD
1 × USB Cable
1 × Bread Board (830 point)
1 × 3.3V/5V Breadboard Power Module
65 × Flexible Jumper Wires
1 × Sensor Shield V5.0
1 × Bluetooth Transceiver HC-05
1 × RFID 13.56MHz Kit With Tags
2 × Standard DC Motor
2 × Stepper Motor
2 × ULN2003 Driver Board for stepper motor
1 × Tower Pro MG995 Servo Motor (180o)
1 × TowerPro SG90 Servo Motor (90o)
1 × Ultrasonic Module HC-SR04
1 × LCD 16×2
1 × 4×4 Matrix Membrane Keypad
1 × 2.4inch TFT Touch Screen Module
1 × 30 Amp Current Sensor Module
1 × Voltage Sensor Module
1 × Gyroscope and Accelerometer Module GY-521 MPU6050 Module
1 × Digital Multimeter DT-830B
1 × Dual Axis Joystick Module
1 × Wireless WiFi module ESP8266
1 × FC-28 Hygrometer (Soil Moisture Sensor)
1 × IR Infrared Obstacles Avoidance Sensor
1 × MQ-2 Smoke Liquefied Flammable Gas Sensor
1 × PIR Sensor (Motion Sensor)
1 × Real Time Clock DS1307 (RTC) Module
2 × Terminal Block Connector 5.08mm
30 × 5mm LED (6pcs of each Red-Green-Blue-Yellow-White)
30 × 1k Ohm
4 × 10k Ohm Horizontal potentiometer
4 × 1uF Capacitor
4 × 100uF Capacitor
4 × 220uF Capacitor
4 × LDR
8 × Push Button
4 × RGB LED
1 × Four Channel Relay Module
2 × Active Buzzer Alarm
1 × DHT11 Temperature & Humidity Sensor
1 × 8×8 Red 64 LED Dot Matrix Display 3mm
1 × Red 4-Digit 7-Segment LED 0.56 inch with Clock Display
1 × Red 1-Digit 7-Segment LED 0.56 inch Display
1 × Flame Sensor Module
1 × Dual H-Bridge DC Drive L298N
1 × Small Vibration Motor
1 × Electronic Vibration Sensor
1 × Dupont Lines Female-Male
1 × Dupont Lines Male-Male
2 × 74HC595N 8-Bit Shift Register DIP-16
6 × BC327 Transistor
2 × Battery Holder Box 2xAA
2 × 2.54mm Pin Header
2 × 3.3V Voltage Regulator (LD1117V33)
2 × 5V Voltage Regulator (LM7805)
1 × Plastic Two Layers Box for Kit

This Kit includes the following items:

  • 1 × Arduino UNO SMD
  • 1 × USB Cable
  • 1 × Bread Board (830 point)
  • 1 × 3.3V/5V Breadboard Power Module
  • 65 × Flexible Jumper Wires
  • 1 × Sensor Shield V5.0
  • 1 × Bluetooth Transceiver HC-05
  • 1 × RFID 13.56MHz Kit With Tags
  • 2 × Standard DC Motor
  • 2 × Stepper Motor
  • 2 × ULN2003 Driver Board for stepper motor
  • 1 × Tower Pro MG995 Servo Motor (180o)
  • 1 × TowerPro SG90 Servo Motor (90o)
  • 1 × Ultrasonic Module HC-SR04
  • 1 × LCD 16×2
  • 1 × 4×4 Matrix Membrane Keypad
  • 1 × 2.4inch TFT Touch Screen Module
  • 1 × 30 Amp Current Sensor Module
  • 1 × Voltage Sensor Module
  • 1 × Gyroscope and Accelerometer Module GY-521 MPU6050 Module
  • 1 × Digital Multimeter DT-830B
  • 1 × Dual Axis Joystick Module
  • 1 × Wireless WiFi module ESP8266
  • 1 × FC-28 Hygrometer (Soil Moisture Sensor)
  • 1 × IR Infrared Obstacles Avoidance Sensor
  • 1 × MQ-2 Smoke Liquefied Flammable Gas Sensor
  • 1 × PIR Sensor (Motion Sensor)
  • 1 × Real Time Clock DS1307 (RTC) Module
  • 2 × Terminal Block Connector 5.08mm
  • 30 × 3mm LED (6pcs of Red-Green-Blue-Yellow-White)
  • 30 × 1k Ohm
  • 4 × 10k Ohm Horizontal potentiometer
  • 4 × 1uF Capacitor
  • 4 × 100uF Capacitor
  • 4 × 220uF Capacitor
  • 4 × LDR
  • 8 × Push Button
  • 4 × RGB LED
  • 1 × Four Channel Relay Module
  • 2 × Active Buzzer Alarm
  • 1 × DHT11 Temperature & Humidity Sensor
  • 1 × 8×8 Red 64 LED Dot Matrix Display 3mm
  • 1 × Red 4-Digit 7-Segment LED 0.56 inch with Clock Display
  • 1 × Red 1-Digit 7-Segment LED 0.56 inch Display
  • 1 × Flame Sensor Module
  • 1 × Dual H-Bridge DC Drive L298N
  • 1 × Small Vibration Motor
  • 1 × Electronic Vibration Sensor
  • 1 × Dupont Lines Female-Male
  • 1 × Dupont Lines Male-Male
  • 2 × 74HC595N 8-Bit Shift Register DIP-16
  • 6 × BC327 Transistor
  • 2 × Battery Holder Box 2xAA
  • 2 × 2.54mm Pin Header
  • 2 × 3.3V Voltage Regulator (LD1117V33)
  • 2 × 5V Voltage Regulator (LM7805)
  • 1 × Plastic Two Layers Box for Kit

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

You may also like…