Dark Light

CC3D OpenPilot Flight Controller 32 Bits Processor with Transparent Case

Availability:

Out of stock


متحكم طيران (مفتوح المصدر) يمكن التحكم بمختلف الطائرات حتى التحكم بـ6 محركات، من مميزات هذا المتحكم انه متكامل من ناحية المزايا والحساسات المزودة به لكن الاهم من ذلك هو انه يحتوي على microprocessor من نوع 32Bits وايضاً يعتبر من ارخص الانواع المتوفرة حالياً.

26,750 د.ع

Out of stock

Compare

CC3D OpenPilot Flight Controller 32 Bits Processor with Transparent Case Open Source Flight Controller

OpenPilot is a next-generation Open Source UAV autopilot. It is a highly capable platform for multi-rotor craft, helicopters, as well as fixed wing aircraft. It has been designed from the ground up by a community of passionate developers from around the globe, with its core design principals being quality, safety, and ease of use.?  Simplicity does not come with any compromises either: with no hard-coded settings, a complete flight plan scripting language and other powerful features, OpenPilot is an extremely capable UAV autopilot platform.

Features:
– Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.
– 3 axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
– Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.
– Software support for Windows, Mac and Linux.
– Direct high speed USB support with no drivers required, a truly plug and play device.
– Spektrum satellite receiver support.
– Futaba S-BUS hardware support.
– Innovative Flexi-port technology for superior port flexibility.
– 4Mbits on-board EEPROM for configuration storage.

Sensors and Components:
– 3 axis Gyroscope array and 3-axis Accelerometer: MPU-6000
– Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers.
– Simultaneous support for multiple receivers.
– ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels.
– MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites.
– FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development).
– 10 PWM outputs to servos or ESC’s, or for camera stabilization.
– Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers.
– Onboard USB connectivity for easy configuration.
– USB and serial telemetry and configuration.
– Supported by powerful OpenPilot GCS.
– 4 Mbit onboard memory.
– 3C Quaternion based complementary filter running at 500Hz.

Package Includes:
1 x CC3D Flight Controller
1 x Set of Wires
1 x Transperant case (Gift)

SKU: out_937 Category: Tag:
  • Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.
  • 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
  • Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.
  • Software support for Windows, Mac and Linux.
  • Direct high speed USB support with no drivers required, a truly plug and play device.
  • Spektrum satellite receiver support.
  • Futaba S-BUS hardware support.
  • Innovative Flexi-port technology for superior port flexibility.
  • 4Mbits on-board EEPROM for configuration storage.
  • 3 axis Gyroscope array and 3-axis Accelerometer: MPU-6000
    Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers.
  • Simultaneous support for multiple receivers.
  • ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels.
  • MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites.
  • FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development).
  • 10 PWM outputs to servos or ESC’s, or for camera stabilization.
  • Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers.
  • Onboard USB connectivity for easy configuration.
  • USB and serial telemetry and configuration.
  • Supported by powerful OpenPilot GCS.
  • 4 Mbit onboard memory.
  • 3C Quaternion based complementary filter running at 500Hz.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

You may also like…