,

ECG (Measurement Pulse Heart) Monitoring Sensor Module Kit

Availablity:

Out of stock


Compare

ECG (Measurement Pulse Heart) Monitoring Sensor Module kit / Ecg module AD8232 ecg measurement pulse heart ecg monitoring sensor module kit

41,000 IQD

Out of stock

ECG (Measurement Pulse Heart) Monitoring Sensor Module kit / Ecg module AD8232 ecg measurement pulse heart ecg monitoring sensor module kit

The AD8232 Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG or Electrocardiogram and output as an analog reading. ECGs can be extremely noisy, the AD8232 Single Lead Heart Rate Monitor acts as an op amp to help obtain a clear signal from the PR and QT Intervals easily.
The AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement applications. It is designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode placement.
The AD8232 Heart Rate Monitor breaks out nine connections from the IC that you can solder pins, wires, or other connectors to. SDN, LO+, LO-, OUTPUT, 3.3V, GND provide essential pins for operating this monitor with an Arduino or other development board. Also provided on this board are RA (Right Arm), LA (Left Arm), and RL (Right Leg) pins to attach and use your own custom sensors. Additionally, there is an LED indicator light that will pulsate to the rhythm of a heartbeat.

Features:
– Operating Voltage: 3.3V
– Analog Output
– Leads-Off Detection
– Shutdown Pin
– LED Indicator
– 3.5mm Jack for Biomedical Pad Connection

Application:
– Fitness and sports heart rate monitoring
– Portable ECG
– Remote health monitor
– Game peripheral equipment
– Bioelectricity signal collection

Package included:
1 x  ECG module sensor kit with accessories
Packed Safely in Bubble Bag.

SKU: 125-ECGKIT Categories: ,
Voltage

  • Voltage: DC3.3 V power supply
  • Analog output
  • Low power consumption control
  • The LED indicator
  • 3.5 mm electrode interfaceAD8232 adopts double poles high-pass filter to eliminate the motion artifacts and electrode half-cell potential.
  • AD8232 adopts an operational amplifier that is without using constraint to build a three pole low pass filter, eliminating extra noises.
  • Rated temp range : 0—-70degree
  • Working temp range: -40—–85degree
Board Label Pin Function Arduino Connection
GND Ground GND
3.3v 3.3v Power Supply 3.3v
OUTPUT Output Signal A0
LO- Leads-off Detect – 11
LO+ Leads-off Detect + 10
SDN Shutdown Not used

125-ECGKIT-10 125-ECGKIT-9

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.