Electronic Vibration Sensor SW-18020P (Shaking Switch)

Description
This is a really simple vibration switch, it use very common in electronics toys, alarm, domestic appliance, electronics devices, smart home system

Features:
1) SW-18020 series is spring type, Non-direction vibration induced trigger switches, any angle can be trigger.
2) The series of switches, at the rest is open circuit “OFF-state”, when the external force to touch and reach the corresponding vibration, or move in speed to reach the adequate centrifugal force. The conductive feet will be conduct instantaneously “ON-State”. When the external force disappear, the switches will be revert the “OFF-State”.
3) Switch have the identification “P” at the bottom, for completely airtight;
4) The series of switches, different model has different sensitivity.
5) In the normal, the switches lifespan can be reached 200,000 cycles.
6) Suitable for the toys, anti-theft alarm system, and electronics scales etc. electronic product.
7) It doesn’t have a direction, normally it’s open circuit inside, and it turns to close when it is shaked instantly, and then turn to open again when motion is gone.

Application:
– Automotive devices
– Home electrical devices
– Automatic power-off function for household appliances
– Air conditon / Air warm blower fall prevention protect switches
– Communication devices
– Toys

SKU: 82-SW180 Categories: ,
  • Voltage: less than 12V
  • Current: <20mA
  • Conductive time: about 2ms
  • Closed resistance:
  • Open resistance: >10M ohm
  • Temperature range: Operating: -40 to 80’C
  • Pull force of terminal: 500gf for 1 minute
  • Humidity: 95% RH, 40°C for 96 hours
  • Operating lifespan: above 200,000 cycles

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.