Dark Light
, ,

Fingerprint Identification Module Sensor

(1 customer review)
Availability:

Out of stock


حساس قراءة البصمة يمكن من خلاله قرأءة بصمة الاصابع وخزنها ومقارنتها مع قراءة سابقة، يمكن استخدامه مع الاردوينو وكافة المتحكات الاخرى لعمل العديد من المشاريع وخصوصا المشاريع الخاصة بأنظمة الحماية

49,750 د.ع

Out of stock

Compare

Fingerprint Identification Module Sensor

All-in-one optical fingerprint sensor will make adding fingerprint detection and verification super simple. These modules are typically used in safes – there’s a high powered DSP chip that does the image rendering, calculation, feature-finding and searching. Connect to any microcontroller or system with TTL serial, and send packets of data to take photos, detect prints, hash and search. You can also enroll new fingers directly – up to 162 finger prints can be stored in the onboard FLASH memory. There’s a red LED in the lens that lights up during a photo so you know its working.
There are basically two requirements for using the optical fingerprint sensor. First is you’ll need to enroll fingerprints – that means assigning ID #’s to each print so you can query them later. Once you’ve enrolled all your prints, you can easily ‘search’ the sensor, asking it to identify which ID (if any) is currently being photographed.
You can enroll using the windows software (easiest and neat because it shows you the photograph of the print) or with the Arduino sketch (good for when you don’t have a windows machine handy or for on-the-road enrolling)

Features:
– Make adding fingerprint detection and verification super simple.
– Typically used in safes – there’s a high powered DSP chip that does the image rendering, calculation, feature-finding and searching.
– Connect to any microcontroller or system with TTL serial, and send packets of data to take photos, detect prints, hash and search.
– You can also enroll new fingers directly – up to 162 finger prints can be stored in the onboard FLASH memory.
– There’s a red LED in the lens that lights up during a photo so you know its working.

Specifications:
* Supply voltage: 3.6 – 6.0VDC
* Operating current: 120mA max
* Peak current: 140mA max
* Fingerprint imaging time: <1.0 seconds
* Window area: 14mm x 18mm
* Signature file: 256 bytes
* Template file: 512 bytes
* Storage capacity: 1000 templates
* False Acceptance Rate: <0.001% (Security level 3)
* False Reject Rate: <1.0% (Security level 3)
* Interface: UART(TTL logic level)
* Baud rate: 9600, 19200, 28800, 38400, 57600 (default is 57600)
* Working temperature rating: -20C to +50C
* Working humidity: 40%-85% RH(no condensing)
* Full Dimensions: 56 x 20 x 21.5mm

See the Datasheet.

Package Includes:
1 x Fingerprint Sensor
1 x Small wire connections

SKU: 208 Categories: , ,
  • Supply voltage: 3.6 – 6.0VDC
  • Operating current: 120mA max
  • Peak current: 140mA max
  • Fingerprint imaging time: <1.0 seconds
  • Window area: 14mm x 18mm
  • Signature file: 256 bytes
  • Template file: 512 bytes
  • Storage capacity: 1000 templates
  • False Acceptance Rate: <0.001% (Security level 3)
  • False Reject Rate: <1.0% (Security level 3)
  • Interface: UART(TTL logic level)
  • Baud rate: 9600, 19200, 28800, 38400, 57600 (default is 57600)
  • Working temperature rating: -20C to +50C
  • Working humidity: 40%-85% RH(no condensing)
  • Full Dimensions: 56 x 20 x 21.5mm

Based on 1 review

5.0 overall
1
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

  1. Mustafa (verified owner)

    بضاعه ممتازه

    Mustafa

You may also like…