-1%

FPGA Xilinx Spartan-3E Board with Interface Board FX2 Module

Availability:

In stock


Compare

بورد FPGA نوع Xiling موديل Spartan 3E مصمم للمطورين ذو المواصفات المميزة، يحتوي المعالج على 500 الف بوابة يمكن برمجتها مع العديد من المميزات مع بورد الانترفيس الخاص به وكيبل البرمجة ومجهز القدرة الخاص به. البورد جدا مناسب لطلبة الدراسات العليا والمختبرات في الجامعات وغيرها.

591,000 ع.د 599,000 ع.د

In stock

FPGA Xilinx Spartan-3E Board with Interface Board FX2 Module

The Spartan®-3E Starter Board provides a powerful and highly advanced self-contained development platform for designs targeting the Spartan-3E FPGA from Xilinx®. It features a 500K gate Spartan-3E FPGA with a 32-bit RISC processor and DDR interfaces.
The board also features a Xilinx Platform Flash, USB, and JTAG parallel programming interfaces with numerous FPGA configuration options via the onboard Intel® StrataFlash and STMicroelectronics® Serial Flash. The board is fully compatible with all versions of the Xilinx ISE® tools, including the free WebPACK™. The board ships with a power supply and USB cable for programming so designs can be implemented immediately with no hidden costs. The Spartan-3E Starter board is also compatible with the MicroBlaze™ Embedded Development Kit (EDK) and PicoBlaze™ from Xilinx.

Spartan-3E Starter Board Features:
Xilinx Spartan-3E (500K gates) XC3S500E FPGA
– Xilinx XCF04 Platform Flash for storing FPGA configurations
– Texas Instruments TPS75003 Triple-Supply Power Management IC
– JTAG & SPI Flash programming with parallel or USB JTAG cable
– Linear Technology Power Supplies
– 64MB Micron® DDR SDRAM
– 16MB Numonyx StrataFlash™
– 2MB ST Microelectronics Serial Flash
– JTAG programming via on-board USB2 port
– Numerous additional configuration options
– SMSC LAN83C185 Ethernet PHY
– PS/2 keyboard
– RJ-45 Ethernet
– 16-pin header for optional LCD modules
– SMA connector for high-speed clock input
– Two DB9 RS-232 connectors
– 100 pin Hirose FX2 connector
– Three 6-pin Pmod ports
– DB15HD VGA

Spartan-3E Starter Board Connectors:
– 100-pin Hirose FX2 connector
– Three 6-pin Pmod ports
– DB15HD VGA
– PS/2 keyboard
– Two DB9 RS-232 connectors
– RJ-45 Ethernet
– 16-pin header for optional LCD modules
– SMA connector for high-speed clock input

Programming:
JTAG programming via on-board USB2 port; JTAG & SPI Flash programming with parallel or USB JTAG cable; numerous additional configuration options

Note:
In order to program and communicate with the Spartan-3E Starter board, you must download and install the free Xilinx ISE WebPACK software.
For reference designs and documentation, please visit Xilinx’s Spartan-3E support page.

Download Datasheet

FX2 Module Interface Board Features:
– Provides 6 additional Pmod™ connectors (four 12-pin and two 6-pin)
– Based on the Hirose FX2 peripheral board connector
– Access to JTAG scan chain
– Access to signals for test points
– Provision for oscillator for clock input to system board

FX2 Module Interface Board Connectors:
– Hirose FX2
– Four 12-pin Pmod
– Two 6-pin Pmod

Package Includes:
1 x Spartan-3E Starter Board
1 x USB A to B cable
1 x External power supply
1 x FX2 Module Interface Board

SKU: 45 Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.