Dark Light

35A Hall Effect Current DC/AC Sensor Module WCS1800

Availability:

In stock


حساس تيار  بتقنية Hall Effect يمكن من خلاله قياس تيار مستمر لغاية 35 امبير وتيار متناوب لغاية 25 امبير. الحساس يولد اشارة فولتية متغيره حسب التيار الذي يتم قياسه ويمكن قراءة هذه الفولتية بأستخدم ADC والموجود في اغلب المتحكمات مثل الاردونيو وغيره. يحتوي الحساس على منفذ لأشارة رقمية لتوفير امكانية اخراج اشارة رقمية عند وصول التيار الى حد معين يمكن تحديده بشكل مباشر من قبل المستخدم للحساس عبر تغيير المقاومة المتغيرة الموجودة في الحساس. يمكن استخدام الحساس في عدة تطبيقات والتي يوجد حاجه فيها لقياس التيار الكهربائي.

19,750 د.ع

In stock

Compare

35A Hall Effect Current DC/AC Sensor Module WCS1800

This sensor could be used to measure DC or AC current; it uses the Hall technique to measure a precise current. It has two output, analog to reflect the measure current and Digital output works as an indicator for specific current value that could be set throughout the built-in potentiometer. Also, the sensor has mounting holes for easy firmware installation. The sensor can be used for Short Over-Current or as Protection Detector.

Feature & Specifications:

  • Main chip: LM393 op amp, WCS1800
  • Operating voltage: DC DC5V
  • Digital signal output indicator;
  • DC current detection range: ± 35A
  • AC current detection range: 25A
  • Current detection resolution of 60mV / A;
  • Output overcurrent signal indication;
  • Critical point set overcurrent signal is adjustable, set the resolution 1.5A;
  • Sample current conversion analog signal output, which can be accessed ADC, TTL level signal output, which can be accessed microcontroller IO port control
  • Size: Length 37mmX high 16.5mm wide 31mmX

Package Includes:
1 x WCS1800 Hall Current Sensor 35A Short Over-Current Detector Protection Module

SKU: 992 Category:
  • Main chip: LM393 op amp, WCS1800
  • Operating voltage: DC DC5V
  • Digital signal output indicator;
  • DC current detection range: ± 35A
  • AC current detection range: 25A
  • Current detection resolution of 60mV / A;
  • Output overcurrent signal indication;
  • Critical point set overcurrent signal is adjustable, set the resolution 1.5A;
  • Sample current conversion analog signal output, which can be accessed ADC, TTL level signal output, which can be accessed microcontroller IO port control
  • Size: Length 37mmX high 16.5mm wide 31mmX

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.