Dark Light
, ,

FLEXmax MPPT 80A Solar Charge Controller

Availability:

Out of stock


جهاز السيطرة على الشحن خاص بالألواح الشمسية 80 امبير يعمل بتقنية الـ MPPT الأفضل في عملية الشحن للبطاريات والاستفادة من أعظم طاقة ممكنة من الألواح الشمسية لشحن بطاريات بفولتيات قليلة تختلف عن فولتية الألواح الشمسية ليضمن زيادة في كسب الطاقة تصل الى 30% مقارنة بالأنواع الأخرى وبقدرة تحويل قدرها 97.5% أي بخسائر لا تذكر. يمكن استخدامه لشحن انوع متعددة من البطاريات بفولتية من 12 الى 60 فولت وبتيار قدره 80 امبير ويمكن تغييره حسب الرغبة. يمتاز الجهاز بنظام تبريد بتقنية عالية مع ميزة خزن البيانات الخاصة بالعمل مثل التيار والوقت والقدرة واعلى قدرة وفولتية الألواح واعلى واقل فولتية للبطارية مع القدرة المستهلكة kWh بشكل يومي ولمدة 128. يحتوي الجهاز على شاشة ايضاً للتحكم والاطلاع على كل التفاصيل الخاصة بالعمل ويمكن حمايتها بباسورد ويمكن التحكم بكل المميزات عبر ازرار أسفل الشاشة ومميزات أخرى يمكن قراءتها في مواصفات المنتج بشكل مفصل.

1,489,000 د.ع

Out of stock

Compare

FLEXmax MPPT 80A Solar Charge Controller

The FLEXmax family of charge controllers is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers.
The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers.
Thanks to active cooling and intelligent thermal management cooling, both FLEXmax charge controllers can operate at their full maximum current rating, 80 Amps, in ambient temperatures as high as 104°F (40°C).
The revolutionary features of the FLEXmax Charge Controllers including support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank.
A built-in, backlit 80-character display shows the current status and logged system performance data for the last 128 days at the touch of a button.
The integrated network communications allow FLEXmax series Charge Controllers to be remotely programmed and monitored via a MATE system display and provides unrivaled complete system integration.
FLEXmax MPPT Charge Controllers are the only choice when you demand a high performance, efficient and versatile charge controller for your advanced power system.

Features
– Increases PV Array Output by up to 30%.
– Advanced Continuous Maximum Power Point Tracking.
– Full Power Output in Ambient Temperatures up to 104°F (40°C).
– Battery Voltages from 12 VDC to 60 VDC.
– Programmable Auxiliary Control Output.
– Built-in 128 days of Data Logging.
– Fully Network Integrated and Programmable.

Displays
Text LCD display for operating parameters, fault messages and self test.

Options
– Menu-driven operation.
– Programming by buttons.

Certificates
Compliant with European Standards (CE).

Data Logging
Last 128 days of Operation – Amp Hours, Watt Hours, Time in Float, Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours, and kW Hours of production

Specifications
Nominal Battery Voltages: 12, 24, 36, 48, or 60 VDC (Single model – selectable via field programming at start-up)
Maximum Output Current: 80 amps @ 104° F (40°C) with adjustable current limit
Maximum Solar Array STC Nameplate: 12 VDC systems 900 Watts / 24 VDC systems 1800 Watts / 48 VDC systems 3600 Watts / 60 VDC Systems 4500 Watts
NEC Recommended Solar Array STC Nameplate: 12 VDC systems 750 Watts / 24 VDC systems 1500 Watts / 48 VDC systems 3000 Watts / 60 VDC Systems 3750 Watts
PV Open Circuit Voltage (VOC): 150 VDC absolute maximum coldest conditions / 145 VDC start-up and operating maximum
Standby Power Consumption: Less than 1 Watt typical
Power Conversion Efficiency: 97.5% @ 60 Amps in at 48 VDC System voltage – Typical
Charging Regulation: Five Stages: Bulk, Absorption, Float, Silent and Equalization
Voltage Regulation Set points: 10 to 80 VDC user adjustable with password protection
Equalization Charging: Programmable Voltage Set point and Duration – Automatic Termination when completed
Battery Temperature Compensation: Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell
Voltage Step-Down Capability: Can charge a lower voltage battery from a higher voltage PV array – Max 150 VDC input
Programmable Auxiliary Control Output: 12 VDC output signal which can be programmed for different control applications (Maximum of 0.2 amps DC)
Status Display: 3.1″ (8 cm) backlit LCD screen – 4 lines with 80 alphanumeric characters total
Network Cabling: Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires)
Operating Temperature Range: Minimum -40° to maximum 60° C (Power capacity of the controller is automatically derated when operated above 40° C)
Conduit Knockouts: One 1″ (35mm) on the back; One 1″ (35mm) on the left side; Two 1″ (35mm) on the bottom
Weight: 5.3 kg
Dimensions: 40 x 14 x 10 cm
Menu Languages: English & Spanish

Package Includes:
1 x MPPT 80A Solar Charge Controller

SKU: M006 Categories: , ,
  • Nominal Battery Voltages: 12, 24, 36, 48, or 60 VDC (Single model – selectable via field programming at start-up)
  • Maximum Output Current: 80 amps @ 104° F (40°C) with adjustable current limit
  • Maximum Solar Array STC Nameplate: 12 VDC systems 900 Watts / 24 VDC systems 1800 Watts / 48 VDC systems 3600 Watts / 60 VDC Systems 4500 Watts
  • NEC Recommended Solar Array STC Nameplate: 12 VDC systems 750 Watts / 24 VDC systems 1500 Watts / 48 VDC systems 3000 Watts / 60 VDC Systems 3750 Watts
  • PV Open Circuit Voltage (VOC): 150 VDC absolute maximum coldest conditions / 145 VDC start-up and operating maximum
  • Standby Power Consumption: Less than 1 Watt typical
  • Power Conversion Efficiency: 97.5% @ 60 Amps in at 48 VDC System voltage – Typical
  • Charging Regulation: Five Stages: Bulk, Absorption, Float, Silent and Equalization
  • Voltage Regulation Set points: 10 to 80 VDC user adjustable with password protection
  • Equalization Charging: Programmable Voltage Set point and Duration – Automatic Termination when completed
  • Battery Temperature Compensation: Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell
  • Voltage Step-Down Capability: Can charge a lower voltage battery from a higher voltage PV array – Max 150 VDC input
  • Programmable Auxiliary Control Output: 12 VDC output signal which can be programmed for different control applications (Maximum of 0.2 amps DC)
  • Status Display: 3.1″ (8 cm) backlit LCD screen – 4 lines with 80 alphanumeric characters total
  • Network Cabling: Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires)
  • Operating Temperature Range: Minimum -40° to maximum 60° C (Power capacity of the controller is automatically derated when operated above 40° C)
  • Conduit Knockouts: One 1″ (35mm) on the back; One 1″ (35mm) on the left side; Two 1″ (35mm) on the bottom
  • Weight: 5.3 kg
  • Dimensions: 40 x 14 x 10 cm
  • Menu Languages: English & Spanish

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.