Soldering Paste Flux 50gm
– Made of no acid soldering flux, semi-solid which is not easy to dump.
– Have strong oxide removal effect to gold-copper alloy substrate and Wire.
– Strong welding power, joint high intensity, low residual.
– This flux have stable performance and low volatility, long use cycles, non-toxic, no irritant smell
– It’s the ideal auxiliary products for High quality electronic products manufacturing.
– Also a good helper for maintenance engineer.
Method of use:
1) Using the end of a match or toothpick, apply a little soldering paste to the leads that will be soldered.
2) Place the soldering iron tip over the leads.
3) Contact the solder against these leads.
4) Heat the solder till it flows freely, then quickly move the soldering iron and solder away.
1 x Soldering Paste Flux 50gm