PP film capacitors are used for high-frequency high-power applications such as induction heating, for pulsed power energy discharge applications, and as AC capacitors for electrical distribution. The AC voltage ratings of these capacitors can range up to 400 kV.
The film capacitor has a lot of excellent characteristics, so it is a good performance of the capacitor. Its main isometric is as follows: no polarity, high insulation resistance, excellent frequency characteristics (wide frequency response), and the media loss is very small. Based on the above advantages, the film capacitor is widely used in the analog circuit. In the signal cross-part, you must use a good frequency characteristic, low dielectric loss of the capacitor, can only ensure that the signal in the transmission, not too much distortion occurs.
- High frequency loss is small
- The internal temperature is small
- High insulation resistance, good self-healing, long life
- Widely used in high frequency, DC, AC, pulse and S correction circuit
Media material: Metallized paper
Power characteristics: High power
Frequency characteristics: High frequency
Adjustment method: fixed
Lead type: Same Lead Wire
Allowable deviation: ± 5 (%)
Pressure value: 400V
Equivalent series resistance (ESR): 1 mΩ
1 x Capacitor 225J400V.