Dark Light
,

ESP32 Chip Dual Core Microprocessor with WiFi and Bluetooth

Availability:

In stock


شريحة ESP-32 مع منفذ للهوائي تعتبر من البوردات الهجينة لأن يحتوي على واي فاي وبلوتوث بنفس الوقت (توجد قاعدة مخصصة لربطه متوفرة في متجر اوروكتيك)، من أحدث واقوى المتحكمات الخاصة بتطبيقات الـIoT وغيرها من التطبيقات وذلك لميزته باستهلاك جدا جدا واطئ للطاقة!! هذه الشريحة تحتوي على النسخة الاحدث والمتطورة من منتجات الـ ESP وهو ESP-32S ويحتوي المتحكم على مايكروبروسسر Dual Core من نوع 32Bit ويعمل بتردد (سرعة معالجة) 240MHz يعني اقوى من الاردوينو والكثير من البوردات والمتحكمات الاخرى. من اهم مميزاته يحتوي على 36 منفذ ادخال واخراج وعلى 18 مدخل انلوك ومخرجين DAC بالإضافة الى صغر حجمه وتحمله العالي للحرارة التي تصل الى 125 درجة مئوية يعني مناسب للتطبيقات الصناعية والاقوى من الصناعية. يحتوي 3 منافذ سيريل وغيرها الكثير والكثير من المواصفات الحصرية.

8,250 د.ع

In stock

Compare

ESP32 Chip Dual Core Microprocessor with WiFi and Bluetooth

ESP32 has a lot more features than ESP8266 and it is difficult to include all the specifications in this Getting Started with ESP32 guide. So, I made a list of some of the important specifications of ESP32 here. But for complete set of specifications, I strongly suggest you refer to the Datasheet.

 

Features:
– High performance-price ratio
– Small volume, easily embedded to other products
– Strong function with support LWIP protocol, Freertos
– Supporting three modes: AP, STA, and AP+STA
– Supporting Lua program, easily to develop
– 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
– Integrated 520 KB SRAM
– Integrated 802.11 b/g/n HT40 Wi-Fi transceiver, baseband, stack and LwIP
– Integrated dual mode Bluetooth (classic and BLE)
– 16 MB flash, memory-mapped to the CPU code space
– 2.3V to 3.6V operating voltage
– (-40°C to +125°C) operating temperature
– On-board PCB antenna / IPEX connector for external antenna

 

Specifications:
– Ultra-low noise analog amplifier
– Hall sensor
– 10x capacitive touch interfaces
– 32 kHz crystal oscillator
– 3 x UARTs, including hardware flow control
– 3 x SPI
– 2 x I2S
– 18 x ADC input channels
– 2 x DAC
– 2 x I2C
– PWM/timer input/output available on every GPIO pin
– OpenOCD debug interface with 32 kB TRAX buffer
– SDIO master/slave 50 MHz
– Supports external SPI flash up to 16 MB
– SD-card interface support
– WEP, WPA/WPA2 PSK/Enterprise
– Hardware-accelerated encryption: AES/SHA2/Elliptical Curve Cryptography/RSA-4096
– Supports sniffer, Station, SoftAP and Wi-Fi direct mode
– Max data rate of 150 Mbps@11n HT40, 72 Mbps@11n HT20, 54 Mbps@11g, and 11 Mbps@11b
– Maximum transmit power of 19.5 dBm@11b, 16.5 dBm@11g, 15.5 dBm@11n
– Minimum receiver sensitivity of -97 dBm
– 135 Mbps UDP sustained throughput
– 5 μA power consumption in Deep-sleep

 

Package Includes:
1 x ESP32S Chip

SKU: 608 Categories: ,

– Ultra-low noise analog amplifier
– Hall sensor
– 10x capacitive touch interfaces
– 32 kHz crystal oscillator
– 3 x UARTs, including hardware flow control
– 3 x SPI
– 2 x I2S
– 18 x ADC input channels
– 2 x DAC
– 2 x I2C
– PWM/timer input/output available on every GPIO pin
– OpenOCD debug interface with 32 kB TRAX buffer
– SDIO master/slave 50 MHz
– Supports external SPI flash up to 16 MB
– SD-card interface support
– WEP, WPA/WPA2 PSK/Enterprise
– Hardware-accelerated encryption: AES/SHA2/Elliptical Curve Cryptography/RSA-4096
– Supports sniffer, Station, SoftAP and Wi-Fi direct mode
– Max data rate of 150 Mbps@11n HT40, 72 Mbps@11n HT20, 54 Mbps@11g, and 11 Mbps@11b
– Maximum transmit power of 19.5 dBm@11b, 16.5 dBm@11g, 15.5 dBm@11n
– Minimum receiver sensitivity of -97 dBm
– 135 Mbps UDP sustained throughput
– 5 μA power consumption in Deep-sleep

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.