Stepper Motor Direction / Speed Drive Controller Pulse Signal Generator

When the controller generates a pulse frequency signal, it can be used as a signal for the stepper driver. Drivers are also required to control the stepper motor. This simple controller + Stepper motor driver + Stepper motor + DC power supply can form a simple control platform. The controller can generate a pulse frequency signal, it can also be generated. PWM Signal pulse duration. There is a bouncing needle on the board., You can set options Select, the default setting should generate a pulse frequency signal.

When the controller generates a frequency pulse signal, has a high, low frequency signal can be selected by a jumping needle, the frequency parameters are approximately:
High: 5.8 kHz-127 kHz
V: 590 Hz-15.8 kHz
Low: 82 Hz-2.3 kHz,

Specifications:

• This is a pulse module, can provide 2.5 khz-68 kHz frequency, power signal for stepper driver.
• If you want to control the stepper motor, you should still use a motor driver.
• If you want to change the Frequency Range, you can change C46 capacitance.
• Power supply: DC15-80V or DC 12V.
• Reverse engine and rotation, stop and run can be controller by keys.
• The motor speed can be controlled by adjusting the potentiometer.
• Size: 73x51x37MM

Package Includes
1 x Stepper motor drive controller