Two Channels Relay 5V Module with Optocoupler

Two Channels Relay 5V Module with Optocoupler for Arduino/ARM/PIC/AVR/DSP Electronic

Feature:
1. Relay contact capacity 250V10A. Relay output normally open, normally closed;
2. Active low. 5V relay signal input voltage range :0-5V;
3. The VCC system power. JD-VCC relay power. Default 5V relay. JD-VCC and VCC shorted.

Relay contact capacity 250V10A. Relay output normally open, normally closed;
Low level valid. 5V relay signal input voltage range: 0-5V;
VCC power to the system. JD-VCC relay in the power supply. The default 5V relay. JD-VCC and VCC can be a shorted
Module parameters:
– Size: 50.6mm (L) * 38.8mm (W) * 19.3mm (H)
– Weight: 30g
– PCB color: black
– Around the Board with 4 mounting holes, the hole diameter 3.1mm, easy installation and fixing.
– Optical coupling isolation, good anti-interference
– Low suction , high level release.
– Timely status light is ON, release the status light is OFF.
– VCC for the power to the system JD_VCC for the relay power, the default 5V relays , plug in the jumper caps.
– Relay output: DC 30V/10A or 250V/10A

Instructions to use:
VCC: System power cathode
GND: System power cathode
IN1-IN2: Relay control port

Package include:
      1 x Two Channels Relay 5V Module with Optocoupler